Pdf m83248 1 spec

M83248/1-908 O-RING MATERIALFLUOROCARBON

M83248-1-016 O-RING - MILITARY SPECIFICATIONS

m83248 1 spec pdf

Mil-Spec Miscellaneous M83248/1-035 to M83248/1-245. Information within is believed to be accurate and reliable. However, Marco Rubber makes no warranty, expressed or implied, that parts supplied in this material will perform satisfactorily in …, mil-r-83248/1a (notice-5), military specification: rubber, fluorocarbon elastomer, high temperature, fluid and compression set resistant (o-rings, class 1, 75 hardness) (24-jul-2008) [see notice-5 for replacement information]., mil-r-83248/1a, dated 10 july 1975, is hereby cancelled..

Military Specification to 3M Heat Shrink Tubing

Mil-Spec O-Rings Military & Aerospace FKM O-Rings. 3.1 Rivets. The rivet type, size, and material shall be as specified on the engineering drawing, parts list or specification. 3.1.1 Rivet handling. The rivets, as furnished, shall be freefrom dust or dirt. 3.2 Preparation for installation. 3.2.1 Rivet holes. Oversize, oblong and irregular-shaped holes shall be cause for rejection., Part details for M83248-1-904 ORING. 21 EA quantity in stock from 1 warehouse line in NS condition. Manufactured by MILITARY SPECIFICATIONS. Alternate partnumbers: M83248/1-904; 5331-00-020-0203..

Military Specification to 3M Heat Shrink Tubing Mil Spec P/N 3M P/N M23053/1- 101 -0 NST 1/4" Black M23053/1- 102 -0 NST 3/8" Black M23053/1- 103 -0 NST 1/2" Black and M83248/1 are intended for use as static seals. These O-rings should not to be used in applications involving reciprocating or rotary motion. • Charts 1, 2A, 2C, 3A, 3B, 4A, and 4B: O-rings made of Buna N have a limited shelf life. Any O-rings made of this material still in stock with cure dates exceeding 120 months should be discarded.

Precix® AMS/MIL Specifications Old Drawings Old Specification New Drawing New Specification Duro Typical Temperature Range - deg C (F) Order Min Notes Perfluoroelastomer P03 AMS7257 75 -15 to 300 (5 to 572) $500 QPL Listed Fluorocarbon F90 * MS9970, M83248/2 AMS7279, AMS-R-83248 CL2, MIL-R-83248 CL2 AS3581 AMS7259 90 -25 to 250 (-13 to 482) One Unit Pack QPL Listed, Hamilton … Rationale: This standard establishes the dimensional and visual quality requirements, lot requirements and packaging and labeling requirements for O-rings molded from AMS7276 rubber. It replaces AMS-R-83248/1 and maintains the part numbering system, M83248/1-XXX, established in MIL-R-83248/1 and continued in AMS-R-83248/1.

Material spec AMS-R-83248 new spec AMS7276 Fluorocarbon. Alternative parts for M83248-1-029. Technical specifications including alternate part number information should be used as a guideline only and are subject to Allaero's terms and conditions. m83248/1-908, fluorocarbon elastomer, 0.644", o-ring. 0 reviews write a review. product code: m83248/1-908 definitive government spec/std reference: m83248/1-908: manufacturers code: 81349: material: rubber fluorocarbon class fpm: non-definitive government spec/std reference: milr83248:

Part Number M83248-1-120 including related part numbers and NSN starting at Page 1. Product Details. M83248 series o-rings are flurocarbon rubber o-rings. Flurocarbon rubber is commonly known as Viton. It is an advanced rubber that has extremely good fuel and heat resistance and is ideally suited for aircraft fuel system applications.

and M83248/1 are intended for use as static seals. These O-rings should not to be used in applications involving reciprocating or rotary motion. • Charts 1, 2A, 2C, 3A, 3B, 4A, and 4B: O-rings made of Buna N have a limited shelf life. Any O-rings made of this material still in stock with cure dates exceeding 120 months should be discarded. MIL-P-25732 MS28775 (1) 70 Nitrile -65 to +275 For Hydraulic Fluid Systems MIL-R-83248 T ype 1, Class 1 M83248/1 (1) 75 Fluorocarbon -20 to +400 High Temperature, Fluid & T ype 1, Class 2 M83248/2 (1) 90 Fluorocarbon -20 to +400 Compression Set Resistance MIL-R-25988 Class 1, Grade 70 M25988/1 (1) 70 Fluorosilicone -80 to +350 Oil & Fuel Resistant

Part Number M83248-1-120 including related part numbers and NSN starting at Page 1. M83248/1-113, FLUOROCARBON ELASTOMER, 0.549", O-RING. 0 reviews Write a review. Product Code: M83248/1-113 In Stock: 1960. NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 CLASS: TEMP RATING-30.0 DEG FAHRENHEIT AND 500.0 DEG FAHRENHEIT: Write a review. Your Name. Your Review. Note: HTML is not translated!

Precision Associates, Inc. Phone: (612) 333-7464 3800 N. Washington Ave. Fax: (612) 342-2417 Minneapolis, MN 55412 Toll: (800) 394-6590. Standard Size International O-Ring Standard Cross Reference www.PrecisionAssoc.com 3 size code that is made up of a letters corresponding to each of 5 cross section groups (A-E), 4 digits indicating ID rounded to .1 mm, a 2nd letter indicating Precision Class and a 3rd letter indicating Visual

and M83248/1 are intended for use as static seals. These O-rings should not to be used in applications involving reciprocating or rotary motion. • Charts 1, 2A, 2C, 3A, 3B, 4A, and 4B: O-rings made of Buna N have a limited shelf life. Any O-rings made of this material still in stock with cure dates exceeding 120 months should be discarded. Part details for M83248-1-904 ORING. 21 EA quantity in stock from 1 warehouse line in NS condition. Manufactured by MILITARY SPECIFICATIONS. Alternate partnumbers: M83248/1-904; 5331-00-020-0203.

RIVETS BUCK TYPE PREPARATION FOR AND INSTALLATION

m83248 1 spec pdf

M83248-1-904 ORING - MILITARY SPECIFICATIONS. Information within is believed to be accurate and reliable. However, Marco Rubber makes no warranty, expressed or implied, that parts supplied in this material will perform satisfactorily in …, Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware including o-rings. Address. 399 East Drive Melbourne, FL 32904. Email This Page Download PDF Download PDF Printable Page. List Price {QUOTE} Qty. Add To Cart Request Quote; Bulk Discount - M83248/1-116 M83248/1-116 Unit Discount Price / % 100 - 499.

m83248 1 spec pdf

Item # M83248/1-116 O-Ring M83248/1-116 On Monroe

m83248 1 spec pdf

Mil-Spec O-Rings Military & Aerospace FKM O-Rings. Part Number M83248-1-012 including related part numbers and NSN starting at Page 1. Rationale: This standard establishes the dimensional and visual quality requirements, lot requirements and packaging and labeling requirements for O-rings molded from AMS7276 rubber. It replaces AMS-R-83248/1 and maintains the part numbering system, M83248/1-XXX, established in MIL-R-83248/1 and continued in AMS-R-83248/1..

m83248 1 spec pdf


MILITARY SPECIFICATION RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID AND COMPRESSION SET RESISTANT (O-RINGS, CLASS 1, 75 HARDNESS) MIL-R-83248/1A, dated 10 July 1975, is hereby cancelled. Future acquisitions for this item may refer to the following SAE International (SAE) Aerospace Standards (AS): 2 requirements. If the O-Rings are determined to be non-conforming, the parts should undergo engineering analysis based on the O-Ring’s location or use in its proposed application.

Our Government Cage Code is: 10464 Quality Assurance per: MIL-I-45208A Packaging per MIL-P-4861 available per request Military Specification O-Rings need only NSN (National Stock Number) or the Military specification Prefix, plus the AS568 dash number (size). Rationale: This standard establishes the dimensional and visual quality requirements, lot requirements and packaging and labeling requirements for O-rings molded from AMS7276 rubber. It replaces AMS-R-83248/1 and maintains the part numbering system, M83248/1-XXX, established in MIL-R-83248/1 and continued in AMS-R-83248/1.

m83248/1-908, fluorocarbon elastomer, 0.644", o-ring. 0 reviews write a review. product code: m83248/1-908 definitive government spec/std reference: m83248/1-908: manufacturers code: 81349: material: rubber fluorocarbon class fpm: non-definitive government spec/std reference: milr83248: AS3209 Mil-Spec Chemical resistant Fluorocarbon FKM O-Rings O-Rings made in the USA, have excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Chemical Resistant O-Ring Specialists from The O-Ring Store LLC, We make getting o-rings easy!

series part# dash number. mat'l. spec. duro. sae arp 5316 recommended shelf life. precix compound. perfluorocarbon (ffkm) ams7257-001 thru 932. ams7257 series part# dash number. mat'l. spec. duro. sae arp 5316 recommended shelf life. precix compound. perfluorocarbon (ffkm) ams7257-001 thru 932. ams7257

(Supersedes MIL-L-23699), MIL-PRF-7808 (Supersedes MIL-L-7808), and AS5780 . The majority of all MAGSEALS were designed and approved with our standard aerospace fluorocarbon (FKM) o-ring elastomer. Our o-ring part number identifies these elastomers with any one of the following (M83248/1-size) that are exposed to the HTS oils. AS3209 Mil-Spec Chemical resistant Fluorocarbon FKM O-Rings O-Rings made in the USA, have excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Chemical Resistant O-Ring Specialists from The O-Ring Store LLC, We make getting o-rings easy!

SkyGeek is your source for high-quality aircraft replacement parts including Military Specification M83461/1 Series O-Rings. The black rubber rings are designed for use on aircrafts and are made to meet the strictest military standards for performance and durability. M83248 series o-rings are flurocarbon rubber o-rings. Flurocarbon rubber is commonly known as Viton. It is an advanced rubber that has extremely good fuel and heat resistance and is ideally suited for aircraft fuel system applications.

Find M83248/1-035 to M83248/1-245 from Mil-Spec Miscellaneous. bisco industries is a premier distributor for Mil-Spec Miscellaneous M83248/1-035 to M83248/1-245. 2 requirements. If the O-Rings are determined to be non-conforming, the parts should undergo engineering analysis based on the O-Ring’s location or use in its proposed application.

Quote M83248/1-012 - M832481012. Get detailed parts information. Defense and Aerospace ID/IQ Contract Support Defense Contractor Support RESET Program Support Spare Parts Inventory Maintenance Spare Parts MIL SPEC Parts Search Military Hardware. M83248/1-012 M83248/1-12 Condition FN O-RING,PREFORM Readily Available. Add to RFQ. M83248/1-012 M83248/1-109 Features and Spec. Outside Diameter: 0.494 inches minimum and 0.516 inches maximum Tempurature Rating: Download PDF Version M83248/1-109_Military-Fasteners-com.pdf * report an issue on this page. This item has been added to your list: . Okay. Something isn't right

series part# dash number. mat'l. spec. duro. sae arp 5316 recommended shelf life. precix compound. perfluorocarbon (ffkm) ams7257-001 thru 932. ams7257 Sealing Solutions for Aerospace and Military . Sealing Environment • Aggressive chemicals, including hydraulic fluids, jet fuels, engine Sealing Solutions for Aerospace and Military The equipment that moves today’s X X V0747-75 AMS-R-83248 Type 1 Class 1 -15 to +400 75 M83248/1 part numbers

M83248-1-010 PACKING O-RING HYD/FUEL/OIL GLAND. item tm 1–2840–254–23p c02 section iv i–38 m83248–1–908 38 5 42 32 83 4 m83248/1–009 2 30 m83248/1–011 15 21 m83248/1–012 2 81 81 98 86 6 92 27 m83248/1–013 2 31 5 66 15 12 15 24 81 31 m83248/1–014 5 67 15 37 38 38 45 49 79 4 81 70 82 11 m83248/1–015 15 23 m83248/1–016 34 2 79 9 81 64 m83248/1–018 16 25 m83248/1, m o d e l # c o lle c tio n f in is h s h a d e / d iffu s e r f ix t u r e : l e n g th /d ia . w id th /e x t. h e ig h t m a x im u m h a n g in g).

Sealing Solutions for Aerospace and Military . Sealing Environment • Aggressive chemicals, including hydraulic fluids, jet fuels, engine Sealing Solutions for Aerospace and Military The equipment that moves today’s X X V0747-75 AMS-R-83248 Type 1 Class 1 -15 to +400 75 M83248/1 part numbers Precision Associates, Inc. Phone: (612) 333-7464 3800 N. Washington Ave. Fax: (612) 342-2417 Minneapolis, MN 55412 Toll: (800) 394-6590. Standard Size

Rationale: This standard establishes the dimensional and visual quality requirements, lot requirements and packaging and labeling requirements for O-rings molded from AMS7276 rubber. It replaces AMS-R-83248/1 and maintains the part numbering system, M83248/1-XXX, established in MIL-R-83248/1 and continued in AMS-R-83248/1. 3.1 Rivets. The rivet type, size, and material shall be as specified on the engineering drawing, parts list or specification. 3.1.1 Rivet handling. The rivets, as furnished, shall be freefrom dust or dirt. 3.2 Preparation for installation. 3.2.1 Rivet holes. Oversize, oblong and irregular-shaped holes shall be cause for rejection.

Find M83248/1-035 to M83248/1-245 from Mil-Spec Miscellaneous. bisco industries is a premier distributor for Mil-Spec Miscellaneous M83248/1-035 to M83248/1-245. Aerospace Industry Material Reference Guide (ORD 5800) 9/2019 Parker Hannifin Corporation • O-Ring & Engineered Seals Division • 2360 Palumbo Drive • Lexington, KY 40509

Part Number M83248-1-012 including related part numbers and NSN starting at Page 1. MIL-P-25732 MS28775 (1) 70 Nitrile -65 to +275 For Hydraulic Fluid Systems MIL-R-83248 T ype 1, Class 1 M83248/1 (1) 75 Fluorocarbon -20 to +400 High Temperature, Fluid & T ype 1, Class 2 M83248/2 (1) 90 Fluorocarbon -20 to +400 Compression Set Resistance MIL-R-25988 Class 1, Grade 70 M25988/1 (1) 70 Fluorosilicone -80 to +350 Oil & Fuel Resistant

Military Specifications - Valley Seal provides sealing solutions specifically for aerospace industry, military also. Listed basic numbers, variations and dash numbers for military available here. Precision Associates, Inc. Phone: (612) 333-7464 3800 N. Washington Ave. Fax: (612) 342-2417 Minneapolis, MN 55412 Toll: (800) 394-6590. Standard Size

item tm 1–2840–254–23p c02 section iv i–38 m83248–1–908 38 5 42 32 83 4 m83248/1–009 2 30 m83248/1–011 15 21 m83248/1–012 2 81 81 98 86 6 92 27 m83248/1–013 2 31 5 66 15 12 15 24 81 31 m83248/1–014 5 67 15 37 38 38 45 49 79 4 81 70 82 11 m83248/1–015 15 23 m83248/1–016 34 2 79 9 81 64 m83248/1–018 16 25 m83248/1 Military Specifications - Valley Seal provides sealing solutions specifically for aerospace industry, military also. Listed basic numbers, variations and dash numbers for military available here.

Military Specification to 3M Heat Shrink Tubing

Mil-Spec O-Rings EAR - All Seals. distributor of o-rings, minnesota quad rings®, hydraulic seals, u-cups, piston cups, vee packings, wipers, lathe cuts, teflon?products, teflon spring loaded & teflon?oil seals, mechanical shaft seals, gaskets, braided packings, bearing guards, sealants, adhesives, lubricants, silicone fluids & greases, rtv's, uv curing equipment, adhesives & coatings, dispensing equipment & a wide variety of, part number m83248-1-012 including related part numbers and nsn starting at page 1.).

M83248/1-109 O-ring Military Fasteners

M83248/1-109 O-ring Military Fasteners. m83248/1-113, fluorocarbon elastomer, 0.549", o-ring. 0 reviews write a review. product code: m83248/1-113 in stock: 1960. nondefinitive spec/std data: 1 type and 1 class: temp rating-30.0 deg fahrenheit and 500.0 deg fahrenheit: write a review. your name. your review. note: html is not translated!, mil-r-83248/1a (notice-5), military specification: rubber, fluorocarbon elastomer, high temperature, fluid and compression set resistant (o-rings, class 1, 75 hardness) (24-jul-2008) [see notice-5 for replacement information]., mil-r-83248/1a, dated 10 july 1975, is hereby cancelled.).

M83248/1-109 O-ring Military Fasteners

Part Number M83248/1-012 McFarlane Aviation Products. these m83248/1 series military specification o-rings are fluorocarbon rubber o-rings that are faa-approved and are designed to replace the older synthetic rubber (nas series) and nitrile (ms series) o-rings with the more advanced fuel-proof fluorocarbon o-rings., item tm 1–2840–254–23p c02 section iv i–38 m83248–1–908 38 5 42 32 83 4 m83248/1–009 2 30 m83248/1–011 15 21 m83248/1–012 2 81 81 98 86 6 92 27 m83248/1–013 2 31 5 66 15 12 15 24 81 31 m83248/1–014 5 67 15 37 38 38 45 49 79 4 81 70 82 11 m83248/1–015 15 23 m83248/1–016 34 2 79 9 81 64 m83248/1–018 16 25 m83248/1).

(revised September 15 2009) Federal Aviation Administration

MIL-R-832481 O-ring AeroBase Group Inc.. and m83248/1 are intended for use as static seals. these o-rings should not to be used in applications involving reciprocating or rotary motion. • charts 1, 2a, 2c, 3a, 3b, 4a, and 4b: o-rings made of buna n have a limited shelf life. any o-rings made of this material still in stock with cure dates exceeding 120 months should be discarded., part details for m83248-1-904 oring. 21 ea quantity in stock from 1 warehouse line in ns condition. manufactured by military specifications. alternate partnumbers: m83248/1-904; 5331-00-020-0203.).

Part Number M83248-1-120 including related part numbers and NSN starting at Page 1. Information within is believed to be accurate and reliable. However, Marco Rubber makes no warranty, expressed or implied, that parts supplied in this material will perform satisfactorily in …

Rationale: This standard establishes the dimensional and visual quality requirements, lot requirements and packaging and labeling requirements for O-rings molded from AMS7276 rubber. It replaces AMS-R-83248/1 and maintains the part numbering system, M83248/1-XXX, established in MIL-R-83248/1 and continued in AMS-R-83248/1. Material spec AMS-R-83248 new spec AMS7276 Fluorocarbon. Alternative parts for M83248-1-010. Technical specifications including alternate part number information should be used as a guideline only and are subject to Allaero's terms and conditions.

Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware including o-rings. Address. 399 East Drive Melbourne, FL 32904. Email This Page Download PDF Download PDF Printable Page. List Price {QUOTE} Qty. Add To Cart Request Quote; Bulk Discount - M83248/1-116 M83248/1-116 Unit Discount Price / % 100 - 499 Military Specifications - Valley Seal provides sealing solutions specifically for aerospace industry, military also. Listed basic numbers, variations and dash numbers for military available here.

mil-r-83248/1a (notice-5), military specification: rubber, fluorocarbon elastomer, high temperature, fluid and compression set resistant (o-rings, class 1, 75 hardness) (24-jul-2008) [see notice-5 for replacement information]., mil-r-83248/1a, dated 10 july 1975, is hereby cancelled. T 1 V 0 W 00 Y 000 Z 0000 Stranding A Solid 7 C 10 D 16 E 19 F 26 G 37 H 41 65 K 105 L 133 M 168 N 259 P 665 817 S 1045 T 1330 V 1672 W 2109 Color Code 0 Black 1 Brown 2 Red 3 Orange 4 Yellow 5 Green 6 Blue Violet 8 Gray 9 White MIL-W-22759/1 PTFE, 600 V/200°CMIL-W-22759/22

Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware including o-rings. Address. 399 East Drive Melbourne, FL 32904. Email This Page Download PDF Download PDF Printable Page. List Price {QUOTE} Qty. Add To Cart Request Quote; Bulk Discount - M83248/1-012 M83248/1-012 Unit Discount Price / % 500 - 999 mil-r-83248/1a (notice-5), military specification: rubber, fluorocarbon elastomer, high temperature, fluid and compression set resistant (o-rings, class 1, 75 hardness) (24-jul-2008) [see notice-5 for replacement information]., mil-r-83248/1a, dated 10 july 1975, is hereby cancelled.

Military Specifications - Valley Seal provides sealing solutions specifically for aerospace industry, military also. Listed basic numbers, variations and dash numbers for military available here. Find M83248/1-035 to M83248/1-245 from Mil-Spec Miscellaneous. bisco industries is a premier distributor for Mil-Spec Miscellaneous M83248/1-035 to M83248/1-245.

O-RINGS INC. PHONE (323) 343-9500